The Sky System 1 monitoring system has been receiving great acclaim
for its superb sound quality and very reasonable pricing.
The Sky System One is comprised of two parts: the SAT 6.5 satellite
speakers and the Sub 12 sub-woofer.
Blue Sky SAT 6.5 Features:
Input Impedance 40k Ohms balanced
Common Mode Rejection Ratio 40dB typical 60Hz
Voltage Sensitivity 200mV = 90dB SPL @ 1M
Maximum Input Level +24dBu balanced
Frequency Response +/- 1.5dB 200 to 10kHz +/- 3.0dB 80 to 20kHz
Low Frequency Cutoff 80Hz
Low Frequency Rolloff 12dB per octave
System Q 0.707 System Crossover Frequency 1.5kHz
System Crossover Slope 4th order Linkwitz-Riley Acoustic
Enclosure
Solid 3/4" MDF construction with 1" front and rear baffle"
Viscoelastic energy absorbing front baffle coating
1/4"x 20 inserts for attachment of OmniMount type 100 brackets.
Dimensions are 12" H x 8" W x 10 1/4" D (11.88" with heatsink and
tweeter wave guide)
Weight 27lbs.
6 1/2" Hemispherical Woofer
Long excursion design with a cast aluminum frame
1 1/2" aluminum voice coil with vented motor for high power handling
Copper shorting ring for lower distortion.
Ultra-Low power compression Mica filled polypropylene cone and rubber
surround
Fully video shielded
1" Tweeter
Dual concentric diaphragm with integral wave guide
High power handling neodymium motor structure
Fully video shielded
Sub 1Khz primary resonance
Satellite Amplifier
Discrete symmetrical bipolar design with localized feedback
100-Watts RMS into 4-Ohms for the woofer
100-Watts RMS into 4-Ohms for the tweeter
THD + Noise less than 0.015% at rated output @1kHz
XLR balanced input
Adjustable gain control.
Computer optimized crossover
Blue Sky Sub 12 Subwoofer Features:
All subwoofermeasurements are measured using the subwoofer direct
input, which does not have a low pass filter.
Voltage Sensitivity 90dB SPL @ 100mv @ 1M (40 to 80Hz bandwidth
limited
Frequency Response (anechoic) 30 to 200Hz +/-3dB
Typical In-Room Response 20 to 200Hz (3000 Cubic Feet)
Bass Management Section
Input Impedance 20k Ohms balanced
Common Mode Rejection Ratio 40dB typical @60Hz
Maximum Input Level (all inputs) +24dBu balanced
Maximum Output Level +24dBu balanced
Output Impedance 200 Ohms balanced
Auto Mute Time Out >15 Minutes
Mute Threshold (all inputs) 30mV
Left & Right Inputs to Sat Outputs
Gain (balanced in and out) 0dB
High-Pass Filter type 2nd order Linkwitz-Riley
High-Pass Filter Cutoff 80Hz
High-pass Filter Q 0.707
THD + Noise 0.002% @ 1kHz @ +4dBu
Left & Right Inputs to Sub Out
Gain 0dB
Low-Pass Filter Type 4th order Linkwitz-Riley Low-Pass Cutoff 80Hz
Subwoofer Direct In to Direct Output Gain 0dB
Low-Pass Filter None
Enclosure
Solid 3/4" MDF construction with 1" MDF Front and Rear Baffle
Viscoelastic energy absorbing front baffle coating
Flush mounted driver
Isolation feet are included.
Inserts for optional attachment of spike feet.
Dimensions are 18" H x 16" W x 20" D (22.07" with heatsink and grill)
Weight 62lbs.
12" Woofer
Long excursion design with cast aluminum frame.
2" voice coil with vented motor for high power handling
Fully video shielded
Subwoofer Amplifier
Discrete symmetrical bipolar design with localized feedback 200-W
RMS into 4 Ohms
THD + Noise less than 0.015% at rated power @100Hz
Adjustable gain control
ŠAll manufacturer rights reserved,
any commercial use of content in either
original or modified form without prior permission is prohibited!
ICB supplies products from over 300 manufacturers, so chances are we
have what you need. For more product information, or to make a purchase,
please e-mail us at sales@icbaudio.com
or call 513-242-7400.
